It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to have it checked by a professional contractor at the very least once a month.
There are many things you could do to keep your tank clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank’s standard performance is 50 percent less solids.
The use of chemical additives in your septic system will not improve its performance. They can actually do more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Most septic tanks require very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.
Septic companies will inspect your tank after pumping it. These inspections can alert you to any problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to calculate the cost of septic tank cleaning. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.