Septic Tank Pump Company

It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best for it to be checked by a professional contractor once a year.

There are many things that you can do to help keep your septic tank clean. You should use less water than you normally do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water usage by using water-efficient toilets. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. American adults consume between 80 to 100 gallons of drinking water each day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tank will not improve its function. They could actually cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks need very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will not only pump your septic tank but also inspect it. These inspections will alert you to any potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections are typically included in the repair costs and cost between $100 and $300.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends you pump your tank once every three-five years. However, depending on your particular situation, you may need to pump more often than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. You may need to wait until the construction is complete before you can install it.

It can be difficult for you to estimate the cost of a cleaning your septic tank. The best way to estimate the cost is to call three local companies. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are necessary but expensive.