Septic Tank Lift Pump System

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to have it checked by a professional contractor at the very least once a month.

There are many things that you can do to help keep your septic tank clean. The first thing you should do is to use less water than usual. The more water in the tank, the more difficult it is for waste to break down. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tanks will not improve its functionality. In fact, they could cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Septic tanks don’t require much maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, it is best that you get it checked as soon as possible if there is a problem.

Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that your tank be pumped every three to five years. Your situation may require you to pump your tank more frequently than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. You may need to wait until the construction is complete before you can install it.

It can be hard to determine how much a septic tank cleaning should cost. Calling three local companies is the best way of estimating the cost. The companies should be able provide a written breakdown of costs. This way you won’t have make guesswork about the cost of your project. Septic tanks are expensive but necessary.