A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.
There are many things that you can do to help keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank’s standard performance is 50 percent less solids.
A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Most septic tanks require very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. Your specific situation may require more frequent pumping. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision based on guesswork. Although they are necessary, they are also very expensive.