Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best that it be checked by a professional contractor every year.
There are many things you can do to keep your septic tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. Most American adults use between 80 and 100 gallons of water a day. This amounts to roughly 90 gallons per year of solid waste. The standard performance of a toilet is 50 percent of solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision based on guesswork. Although they are essential, they can be costly.