A well-maintained septic tank can reduce the need to make costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.
There are many things you could do to keep your tank clean. The first thing you should do is to use less water than usual. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water by not running your faucet while you brush or wash dishes.
The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. The average American adult uses between 80-100 gallons of water per day. This is equivalent to 90 gallons worth of solid waste per year. The standard performance of a toilet is 50 percent of solids.
A chemical additive in your septic tank will not improve its function. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections will alert you to any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be able drive over the tank site while building the house. This could slow down the building process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This way you won’t have make guesswork about the cost of your project. Although they are necessary, they are also very expensive.