Septic Pump Tanks

A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to have it checked by a professional contractor at the very least once a month.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water by not running your faucet while you brush or wash dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This is equivalent to 90 gallons worth of solid waste per year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.

Septic tanks are very easy to maintain. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can help you identify any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t have to drive over the tank site as they build the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.