Septic Pump Station Tank

It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best for it to be checked by a professional contractor once a year.

There are many things you can do to keep your septic tank clean. First, you should not use more water than you usually do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.

The function of your septic tank won’t be improved by adding chemicals. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can alert you to any problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends that you pump your tank every three to five year. Your situation may require you to pump your tank more frequently than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t be able drive over the tank site while building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are necessary but expensive.