Septic Holding Tank Pump Controller

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best for it to be checked by a professional contractor once a year.

There are many things that you can do to help keep your septic tank clean. You should use less water than you normally do. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks are very easy to maintain. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, it is best that you get it checked as soon as possible if there is a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends that you pump your tank every three to five year. Your situation may require you to pump your tank more frequently than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be able drive over the tank site while building the house. This could cause delays in the construction process. If the septic tank is in an area where supplies are delivered, it will prevent them from driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able to give you a detailed cost breakdown in writing. This way you won’t have make guesswork about the cost of your project. Although they are necessary, they are also very expensive.