Pumping Septic Tank From One Lid

A well-maintained septic tank can reduce the need to make costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.

You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Septic tanks need very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends that you pump your tank every three to five year. However, your specific situation may require a more frequent pumping than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could slow down the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision based on guesswork. Septic tanks are expensive but necessary.