It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best for it to be checked by a professional contractor once a year.
There are many things you can do to keep your septic tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. A pump is required to remove the sludge from the tank’s bottom.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Americans consume between 80 and 100 gallons per day. This translates to approximately 90 gallons of solid waste every year. A septic tank should be capable of reducing solids by 50 percent.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks need very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, it is best that you get it checked as soon as possible if there is a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections will alert you to any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could slow down the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult to calculate the cost of septic tank cleaning. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.