Pumping Out Job Site Septic “Holding Tank” Tank

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.

There are many things you could do to keep your tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running the faucet while brushing your teeth or washing your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tank will not improve its function. They can actually do more harm than good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends you pump your tank once every three-five years. Your specific situation may require more frequent pumping. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. You may need to wait until the construction is complete before you can install it.

It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Although they are necessary, they are also very expensive.