Pump Septic Tank 37659

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to get it checked by a professional contractor at least once a year.

There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. The tank will need to be pumped when the sludge has reached the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tanks will not improve its functionality. They can actually do more harm than good. For example, sodium hydroxide could cause more harm than good.

Septic tanks need very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends you pump your tank once every three-five years. Your specific situation may require more frequent pumping. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t have to drive over the tank site as they build the house. This could slow down the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.

It can be hard to determine how much a septic tank cleaning should cost. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are necessary but expensive.