Pump For Pumping Septic Tank

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best that it be checked by a professional contractor every year.

There are many ways you can help your septic system stay clean. The first thing you should do is to use less water than usual. The more water in the tank, the more difficult it is for waste to break down. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water by not running the faucet while brushing your teeth or washing your dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. The tank will need to be pumped when the sludge has reached the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Most septic tanks require very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, if you notice a problem, it is best to get it checked immediately.

Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends you pump your tank once every three-five years. However, your specific situation may require a more frequent pumping than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult to estimate the cost of a septic tank clean. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are necessary but expensive.