It is possible to reduce the cost of costly repairs by keeping your septic tank clean. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.
There are many things you could do to keep your tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water usage by using water-efficient toilets. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. The tank will need to be pumped when the sludge has reached the bottom.
You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.
The use of chemical additives in your septic system will not improve its performance. They can actually do more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks need very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections can alert you to any problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends you pump your tank once every three-five years. However, your specific situation may require a more frequent pumping than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be able drive over the tank site while building the house. This could delay the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. The best way to estimate the cost is to call three local companies. You should receive a detailed cost breakdown from the companies. This way you won’t have make guesswork about the cost of your project. Although they are essential, they can be costly.