Norman Oklahoma Septic Tank Pump Cost

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many things you could do to keep your tank clean. One of the first things you should do is use less water than you typically would. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Most American adults use between 80 and 100 gallons of water a day. This is equivalent to 90 gallons worth of solid waste per year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tanks will not improve its functionality. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can alert you to any problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. However, your specific situation may require a more frequent pumping than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be able drive over the tank site while building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision based on guesswork. Although they are essential, they can be costly.