A well-maintained septic tank can reduce the need to make costly repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water usage by using water-efficient toilets. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank’s standard performance is 50 percent less solids.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will inspect your tank after pumping it. These inspections will alert you to any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be hard to determine how much a septic tank cleaning should cost. Three local companies are the best way to estimate the cost. You should receive a detailed cost breakdown from the companies. This way you won’t have make guesswork about the cost of your project. Septic tanks are necessary but expensive.