Kent Island Septic Tank Pumping

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.

There are many ways you can help your septic system stay clean. The first thing you should do is to use less water than usual. The more water that is in the tank, it is more difficult for waste to be dissolved. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Americans consume between 80 and 100 gallons per day. This equates to roughly 90 gallons of solid trash per year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tank will not improve its function. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. If you do notice a problem, it’s best to have it checked right away.

Septic companies will inspect your tank after pumping it. These inspections will alert you to any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

Before you start building a house, it is a good idea to install a septic tank. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. The best way to estimate the cost is to call three local companies. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are necessary but expensive.