Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.
There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in the tank, the more difficult it is for waste to break down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. The standard performance of a toilet is 50 percent of solids.
The use of chemical additives in your septic system will not improve its performance. They can actually do more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks don’t require much maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to calculate the cost of septic tank cleaning. It is best to contact three local companies to estimate the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision based on guesswork. Septic tanks are expensive but necessary.