Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.
There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
A chemical additive in your septic tanks will not improve its functionality. In fact, they could cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks are very easy to maintain. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Most septic tanks do not require pumping unless there are significant amounts of sludge. It is important to immediately notify your local health department if you suspect a problem.
Septic companies will inspect your tank after pumping it. These inspections can identify potential problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.
The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. Three local companies are the best way to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.