It is possible to reduce the cost of costly repairs by keeping your septic tank clean. Bacteria in the tank are constantly working to break down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best for it to be checked by a professional contractor once a year.
There are many things you could do to keep your tank clean. One of the first things you should do is use less water than you typically would. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example, sodium hydroxide could cause more harm than good.
Most septic tanks require very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Most septic tanks do not require pumping unless there are significant amounts of sludge. However, it is best that you get it checked as soon as possible if there is a problem.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.
The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends you pump your tank once every three-five years. Your situation may require you to pump your tank more frequently than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. Three companies should be able give you a written breakdown of the cost. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are expensive but necessary.