Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best that it be checked by a professional contractor every year.
There are many things that you can do to help keep your septic tank clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also save water by not running your faucet while you brush or wash dishes.
The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
Depending on how big your home is, you will need a septic system that can handle the amount you use. Americans consume between 80 and 100 gallons per day. This amounts to roughly 90 gallons per year of solid waste. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example, sodium hydroxide could cause more harm than good.
Most septic tanks require very little maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can help you identify any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. However, your specific situation may require a more frequent pumping than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t be allowed to drive over the tank while they’re building the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult to calculate the cost of septic tank cleaning. It is best to contact three local companies to estimate the cost. The companies should be able to give you a detailed cost breakdown in writing. This way you won’t have make guesswork about the cost of your project. Septic tanks are expensive but necessary.