It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best that it be checked by a professional contractor every year.
There are many things you could do to keep your tank clean. You should use less water than you normally do. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle down to the bottom, while the oils & grease rise to its top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This amounts to roughly 90 gallons per year of solid waste. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, it is best that you get it checked as soon as possible if there is a problem.
Septic companies will not only pump your septic tank but also inspect it. These inspections can help you identify any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections are typically included in the repair costs and cost between $100 and $300.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. Your specific situation may require more frequent pumping. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. It is possible that you will need to wait until almost all of the building work is completed before you can have it installed.
It can be difficult for you to estimate the cost of a cleaning your septic tank. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision based on guesswork. Although they are essential, they can be costly.