Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to get it checked by a professional contractor at least once a year.
There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. The tank will need to be pumped when the sludge has reached the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. Americans consume between 80 and 100 gallons per day. This is equivalent to 90 gallons worth of solid waste per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. Sodium hydroxide, for example, can add more alkalinity to the system, which can cause accelerated clogging and cause a sludge buildup.
Septic tanks need very little maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, if you notice a problem, it is best to get it checked immediately.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections will alert you to any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult for you to estimate the cost of a cleaning your septic tank. Calling three local companies is the best way of estimating the cost. Three companies should be able give you a written breakdown of the cost. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are expensive but necessary.