Fixing Septic Tank

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best for it to be checked by a professional contractor once a year.

There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water that is in the tank, it is more difficult for waste to be dissolved. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. American adults consume between 80 to 100 gallons of drinking water each day. This equates to roughly 90 gallons of solid trash per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.

A chemical additive in your septic tank will not improve its function. They could actually cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Septic tanks are very easy to maintain. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can identify potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends you pump your tank once every three-five years. However, your specific situation may require a more frequent pumping than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

Before you start building a house, it is a good idea to install a septic tank. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult for you to estimate the cost of a cleaning your septic tank. Calling three local companies is the best way of estimating the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.