Do It Yourself Septic Tank Pumping

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The bacteria in the tank is constantly working to eliminate solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best that it be checked by a professional contractor every year.

There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. Pumps will be required to remove the sludge once it reaches the bottom.

You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. The standard performance of a toilet is 50 percent of solids.

A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. It is important to immediately notify your local health department if you suspect a problem.

Septic companies will not only pump your septic tank but also inspect it. These inspections can identify potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends pumping your tank once every three to five years. Your situation may require you to pump your tank more frequently than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t have to drive over the tank site as they build the house. This could delay the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. Three local companies are the best way to estimate the cost. The companies should be able provide a written breakdown of costs. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are essential, they can be costly.