Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.
There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in the tank, the more difficult it is for waste to break down. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your house is pumped into a septic tank it splits into three layers: solid (sludge), fluid (scum), as well as oil and grease. The solids settle at the bottom of the tank while the oils and grease rise up to the top. The septic tank’s bacteria breaks down some of the waste and distributes it to the leach fields. A pump is required to remove the sludge from the tank’s bottom.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Most American adults use between 80 and 100 gallons of water a day. This equates to roughly 90 gallons of solid trash per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Most septic tanks require very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. If you do notice a problem, it’s best to have it checked right away.
Septic companies will not only pump your septic tank but also inspect it. These inspections can identify potential problems. An inspection of the septic tank can be performed on a single occasion or when you purchase a new property. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends pumping your tank once every three to five years. However, depending on your particular situation, you may need to pump more often than this. A person with a 1,000-gallon tank might need it every nine to 12, whereas a family of five might need it every two or three years.
Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be allowed to drive over the tank while they’re building the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to calculate the cost of septic tank cleaning. Calling three local companies is the best way of estimating the cost. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are essential, they can be costly.