Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank’s bacteria is constantly working to remove solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.
There are many things that you can do to help keep your septic tank clean. You should use less water than you normally do. The more water in the tank, the more difficult it is for waste to break down. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on how big your home is, you will need a septic system that can handle the amount you use. The average American adult uses between 80-100 gallons of water per day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank’s standard performance is 50 percent less solids.
A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks don’t require much maintenance. However, they need to be pumped frequently to remove solid waste that can’t flow into the leach fields. Unless there is significant sludge buildup, most septic tank do not need to be pumped. If you do notice a problem, it’s best to have it checked right away.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can identify potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections cost about $100 to $300 and are usually rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that you pump your tank every three to five year. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
When building a new home, you should install a tank before you lay the foundation. Contractors won’t be able drive over the tank site while building the house. This could delay the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. You may need to wait until the construction is complete before you can install it.
It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Septic tanks are necessary but expensive.