Cyclone Septic Tank Aerator Pump

Keeping your septic tank clean and well-maintained can help reduce the need for costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best for it to be checked by a professional contractor once a year.

There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank, the more difficult it is for waste to break down. You can reduce water usage by using water-efficient toilets. You can also save water by not running the faucet while brushing your teeth or washing your dishes.

When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. A pump is required to remove the sludge from the tank’s bottom.

You should have a septic tank to handle the water you use, depending on the size of the home. Americans consume between 80 and 100 gallons per day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.

A chemical additive in your septic tanks will not improve its functionality. They could actually cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. It is important to immediately notify your local health department if you suspect a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can help you identify any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

If you’re building a new house, you should consider building a septic tank on the site before laying the foundation of the house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult for you to estimate the cost of a cleaning your septic tank. Three local companies are the best way to estimate the cost. Three companies should be able give you a written breakdown of the cost. This way you won’t have make guesswork about the cost of your project. Although they are essential, they can be costly.