Costs To Pump Septic Tank

It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to get it checked by a professional contractor at least once a year.

There are many ways you can help your septic system stay clean. First, you should not use more water than you usually do. The more water in the tank the more difficult it will be for waste to be broken down. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water by not running the faucet while brushing your teeth or washing your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. A pump is required to remove the sludge from the tank’s bottom.

Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. A septic tank should be capable of reducing solids by 50 percent.

The use of chemical additives in your septic system will not improve its performance. They could actually cause more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.

Most septic tanks require very little maintenance. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. However, it is best that you get it checked as soon as possible if there is a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections will alert you to any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that you pump your tank every three to five year. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

When building a new home, you should install a tank before you lay the foundation. Contractors won’t have to drive over the tank site as they build the house. This could cause delays in the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be hard to determine how much a septic tank cleaning should cost. Three local companies are the best way to estimate the cost. The companies should be able provide a written breakdown of costs. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are essential, they can be costly.