It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank’s bacteria is constantly working to remove solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to have it checked by a professional contractor at the very least once a month.
There are many things that you can do to help keep your septic tank clean. First, you should not use more water than you usually do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water consumption by using water efficient toilets, showerheads and washing machines. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. Pumps will be required to remove the sludge once it reaches the bottom.
Depending on the size of your home, you should have a septic tank that will handle the amount of water you use. Americans consume between 80 and 100 gallons per day. This equates to roughly 90 gallons of solid trash per year. A septic tank’s standard performance is 50 percent less solids.
The use of chemical additives in your septic system will not improve its performance. In fact, they can cause more harm that good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Most septic tanks do not require pumping unless there are significant amounts of sludge. It is important to immediately notify your local health department if you suspect a problem.
The septic company will pump your septic tank and also do a short inspection of the tank. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections usually cost $100 to $300 and are rolled into the repair costs.
How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could delay the building process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. Before you can get it in place, you might have to wait until all the construction is done.
It can be hard to determine how much a septic tank cleaning should cost. The best way to estimate the cost is to call three local companies. The companies should be able to give you a detailed cost breakdown in writing. This will ensure that you don’t make any guesswork and can make an informed decision. Septic tanks are expensive but necessary.