A well-maintained septic tank can reduce the need to make costly repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best for it to be checked by a professional contractor once a year.
There are many ways you can help your septic system stay clean. One of the first things you should do is use less water than you typically would. The more water in the tank, the more difficult it is for waste to break down. You can reduce water usage by using water-efficient toilets. You can also save water by not running the faucet while brushing your teeth or washing your dishes.
When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle down to the bottom, while the oils & grease rise to its top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. The tank will need to be pumped when the sludge has reached the bottom.
Depending on the size and needs of your home, you need a tank that can handle the amount water you use. The average American adult uses between 80-100 gallons of water per day. This amounts to roughly 90 gallons per year of solid waste. The standard performance of a toilet is 50 percent of solids.
The function of your septic tank won’t be improved by adding chemicals. In fact, they can cause more harm that good. For example, sodium hydroxide could cause more harm than good.
Septic tanks need very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. If you do notice a problem, it’s best to have it checked right away.
In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections will alert you to any potential problems. A septic tank inspection can be done on a one-time basis or when purchasing a new property. These inspections usually cost $100 to $300 and are rolled into the repair costs.
The size of your tank as well as the number of people in your home will determine how often you need to pump your septic tank. The EPA recommends that your tank be pumped every three to five years. However, your specific situation may require a more frequent pumping than this. A single person may only need to pump their 1,000-gallon tank every nine to twelve years, while a family of five may need to pump every two to three.
You should consider putting a septic system on the site prior to laying the foundation for a new house. Contractors won’t have to drive over the tank site as they build the house. This could delay the construction process. If the septic tanks are located in an area where supplies are delivered it will prevent them driving over it. So, you may have to wait until the building process is almost complete before you can get it installed.
It can be difficult to estimate the cost of a septic tank clean. The best way to estimate the cost is to call three local companies. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision on the basis of guesswork. Although they are essential, they can be costly.