It is possible to reduce the cost of costly repairs by keeping your septic tank clean. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea that it be cleaned at the least once every three year to ensure it is in good condition. It is best to have it checked by a professional contractor at the very least once a month.
There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in the tank, the more difficult it is for waste to break down. Water-efficient toilets and showerheads can help reduce water consumption. You can also save water by not running your faucet while you brush or wash dishes.
When wastewater from your home passes into the septic tank, it separates into three layers: solid waste (sludge), liquid waste (scum), and oil and grease. The solids settle down to the bottom, while the oils & grease rise to its top. The septic tank is populated with bacteria that breaks down some waste and distributes it in the leach field. When the sludge reaches the bottom of the tank, a pump will be necessary to remove the buildup.
You should have a septic tank to handle the water you use, depending on the size of the home. The average American adult uses between 80-100 gallons of water per day. This equates to roughly 90 gallons of solid trash per year. Generally speaking, the standard performance of a septic tank is 50 percent reduction of solids.
A chemical additive in your septic tanks will not improve its functionality. They can actually do more harm than good. For example sodium hydroxide can add more acidity to the system. This can cause accelerated clogging or sludge accumulation.
Septic tanks are very easy to maintain. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. However, if you notice a problem, it is best to get it checked immediately.
Septic companies will inspect your tank after pumping it. These inspections will alert you to any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.
The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends you pump your tank once every three-five years. Your specific situation may require more frequent pumping. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.
Before you start building a house, it is a good idea to install a septic tank. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. Before you can get it in place, you might have to wait until all the construction is done.
It can be difficult to estimate the cost of a septic tank clean. Calling three local companies is the best way of estimating the cost. The companies should be able to give you a detailed cost breakdown in writing. This way, you won’t have to make a decision based on guesswork. Septic tanks are necessary but expensive.