Asheville Septic Tank Pumping

A well-maintained septic tank can reduce the need to make costly repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea if it is not cleaned every three years. This will ensure that it functions properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many things that you can do to help keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in the tank the more difficult it will be for waste to be broken down. Water-efficient toilets and showerheads can help reduce water consumption. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

When wastewater from your home is discharged into the septic tanks, it separates into three layers. The solids settle to the bottom of the tank, while the oils and grease rise to the top. The bacteria in the septic tanks breaks down some of this waste and distributes it to a leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Most American adults use between 80 and 100 gallons of water a day. This equates to roughly 90 gallons of solid trash per year. A septic tank’s standard performance is 50 percent less solids.

The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example, sodium hydroxide could cause more harm than good.

Most septic tanks require very little maintenance. They do need to be pumped every so often to remove any solid waste which is not allowed into the leach area. Unless there is a significant amount of sludge buildup in the tank, most septic tanks don’t require pumping. If you do notice a problem, it’s best to have it checked right away.

Septic companies will inspect your tank after pumping it. These inspections will alert you to any potential problems. A septic inspection can be done once or several times during a property purchase. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size and number of people living in your house will affect how often you pump your septic tanks. The EPA recommends pumping your tank once every three to five years. Your specific situation may require more frequent pumping. For example, a single person with a 1,000-gallon tank may need it every nine to 12 years, while a family with five people may require pumping every two to three years.

Before you start building a house, it is a good idea to install a septic tank. Contractors won’t be allowed to drive over the tank while they’re building the house. This could delay the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. Before you can get it in place, you might have to wait until all the construction is done.

It can be difficult to calculate the cost of septic tank cleaning. It is best to contact three local companies to estimate the cost. The companies should be able provide a written breakdown of costs. This way, you won’t have to make a decision based on guesswork. Although they are necessary, they are also very expensive.