Apple Valley Septic Tank Pumping

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. The tank is constantly being cleaned by bacteria that breaks down solid waste. It is a good idea to have it cleaned at least every three years to make sure it is functioning properly. It is best to have it checked by a professional contractor at the very least once a month.

There are many ways you can help your septic system stay clean. You should use less water than you normally do. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water usage by using water-efficient toilets. You can also save water if you don’t run the faucet while you brush your teeth or wash your dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. The tank will need to be pumped when the sludge has reached the bottom.

Depending on the size and needs of your home, you need a tank that can handle the amount water you use. Most American adults use between 80 and 100 gallons of water a day. This translates to approximately 90 gallons of solid waste every year. A septic tank’s standard performance is 50 percent less solids.

A chemical additive in your septic tank will not improve its function. In fact, they can cause more harm that good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks don’t require much maintenance. They must be pumped on a regular basis to remove any solid waste that is not allowed to flow into the leach field. Unless there is significant sludge buildup, most septic tank do not need to be pumped. It is important to immediately notify your local health department if you suspect a problem.

The septic company will pump your septic tank and also do a short inspection of the tank. These inspections can help you identify any potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections can cost anywhere from $100 to $300, and are often included in the repair cost.

The size of your tank, as well the number of people who live in your home, will impact how often you need pump your septic tank. The EPA recommends pumping your tank once every three to five years. Your situation may require you to pump your tank more frequently than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

When building a new home, you should install a tank before you lay the foundation. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could cause delays in the construction process. If the septic system is located near where supplies are delivered, they will be unable to drive over it. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be difficult to estimate the cost of a septic tank clean. The best way to estimate the cost is to call three local companies. You should receive a detailed cost breakdown from the companies. This will ensure that you don’t make any guesswork and can make an informed decision. Although they are necessary, they are also very expensive.