Air Bubbles When Flush Toilet Septic Tank Needs Pumping Out

Maintaining a clean and well-maintained septic system can help to reduce the need for expensive repairs. Bacteria in the tank are constantly working to break down solid waste. It is a good idea for it to be cleaned at least once every three years to ensure it is working properly. It is best to get it checked by a professional contractor at least once a year.

There are many things you can do to keep your septic tank clean. One of the first things you should do is use less water than you typically would. The more water in a tank, the more difficult it becomes for wastes to be reduced. You can reduce water use by using water-efficient toilets, showerheads, and washing machines. You can also reduce water consumption by not running the tap while you brush your teeth and wash dishes.

The septic tank separates wastewater from your home into three layers: solid waste, liquid waste (scum), oil and grease. The solids settle to bottom of the tank and the oils, grease, and other substances rise to the top. Bacteria in the septic tank break down some of the waste and distribute it to the leach field. Pumps will be required to remove the sludge once it reaches the bottom.

Depending on how big your home is, you will need a septic system that can handle the amount you use. American adults consume between 80 to 100 gallons of drinking water each day. This is equivalent to 90 gallons worth of solid waste per year. A septic tank’s standard performance is 50 percent less solids.

The use of chemical additives in your septic system will not improve its performance. In fact, they could cause more harm than good. For example, sodium hydroxide can increase the alkalinity of the system, which can accelerate clogging and lead to sludge buildup.

Septic tanks are very easy to maintain. However, they must be pumped regularly to remove the solid waste that cannot flow into the leach field. Fortunately, most septic tanks don’t need pumping unless there is a significant sludge buildup. However, if you notice a problem, it is best to get it checked immediately.

In addition to pumping your septic tank, septic companies will also do a brief inspection of your tank. These inspections can identify potential problems. A septic tank inspection is possible on a one-time or a permanent basis. These inspections usually cost $100 to $300 and are rolled into the repair costs.

How often you should pump your septic tank depends on the size of your tank and the number of people living in your home. The EPA recommends that your tank be pumped every three to five years. However, depending on your particular situation, you may need to pump more often than this. For example, a single person might need to pump their 1,000-gallon tank once every nine to 12 year, while a five-person family may need to pump it every two to 3 years.

You should consider putting a septic system on the site prior to laying the foundation for a new house. This way, contractors won’t be able to drive over the tank site while they’re building the house. This could slow down the building process. It will stop people from driving over the septic tank if it is located in an area that supplies are delivered. So, you may have to wait until the building process is almost complete before you can get it installed.

It can be hard to determine how much a septic tank cleaning should cost. It is best to contact three local companies to estimate the cost. You should receive a detailed cost breakdown from the companies. This way, you won’t have to make a decision based on guesswork. Septic tanks are expensive but necessary.